SUV & TRUCK ACCESSORIES
Call Toll Free

Facebook   Twitter


Join our mailing list!



We proudly accept:





 



 

BurnLounge.com - Buy Music, Sell Music, Online Music Store

Green Beret Foundation

BClick to verify BBB accreditation and to see a BBB report.

(Your shopping cart is empty)

  Home > HUMMER H2 SUT >

HUMMER H2 Aluminum Transmission Pan (GM 700R4,4L60E Late, Deep Model)
HUMMER H2 Aluminum Transmission Pan (GM 700R4,4L60E Late, Deep Model)


 
Alternative Views:


Our Price: $324.00



Product Code: PML-9427


Machining:

Select Finish



 
Description Technical Specs
 

This PML pan fits GM 700R4, 4L60, 4L60E, 4L65E, 4L70, 4L70E, and 4L75E transmissions. PML designed this pan to add transmission oil capacity for vehicles that have an exhaust pipe or frame cross member under the rear of the stock pan.

Some examples of vehicles that this pan will fit are:

  • Avalanche, 2002 & newer, 5.3 or 6.0 engines
  • C1500 1996-1998 with 4.3, 5.0, or 5.7 engines
  • Hummer H2 2003-2007
  • Hummer H3 2006-2009, exhaust and frame clearance problems on stock vehicles (check carefully before ordering)
  • Isuzu Ascender, 2003-2009
  • K1500 1996-1998 with 4.3, 5.0, or 5.7 engines
  • Silverado 1500, 1999 & newer, 4.3, 4.8, 5.3, 6.0 engines
  • Sierra 1500, 1999 & newer, 4.3, 4.8, 5.3, 6.0 engines
  • SSR, 2003-2006, 5.3, LS2 6.0 engines (automatic transmission)
  • Suburban 1500, 1992-1999, 5.7, 6.5 diesel engines
  • Suburban 1500, 2000 & newer, 5.3, 6.0 engines
  • Tahoe 1995-1999, 5.7 engine
  • Tahoe 2000-2008, 4.8 and 5.3 engines
  • Tahoe 2009, 4.8 engine
  • Trailblazer 2002 & newer
  • Trailblazer SS 2006 & newer
  • Yukon 1992-1999, 5.7 engine
  • Yukon 2000-2008, 4.8 and 5.3 engines
  • Yukon 2009, 4.8 engine

Filter Information

PML GM 700R4, 4L60 tranny pan filter supports

This GM 700R4/4L60 transmission pan has cast-in filter supports as shown in image at left. A filter extension is not needed. Our filter supports are designed to work with the 4L60E early filters or 700R4 filters.

If you have a 2012 1500, neither the late nor the early model filters will work. We are looking into this. Please contact us for information.

Filter information is for reference only.

Filters for 4L60, 700R4, 200-4R PML tranny pans

General Info

You may have to modify your shift cable mounting bracket to use this pan.

The pan has a boss that can be machined for a temperature sensor.

Hummer H2 PML Transmission Pan Install

PML transmission pan on a Hummer H2

Hummer H2, 2006, with a GM 4L65E transmission, with a PML GM transmission pan is installed. Our thanks to Scott for sending pictures.

Street Trucks Magazine PML Transmission Pan Install

See this pan in the March 2010 issue of Street Trucks magazine. The article is available on-line.

Avalanche 1500 PML Transmission Pan Install

In the Chevy Avalanche Fan Club Forum, a 9/14/10 post described the installation of this PML transmission pan on a 1500 Avalanche. Other aftermarket pans required modifications to the exhaust, but the PML pan installation took this guy/gal under 4 hours. We have summarized his steps below.

  • Got a Wix 58904 filter and it came with a gasket (early model filter)
  • Removed skid plate
  • Removed the engine mount bolts and jacked up the back of the transmission
  • Put in the PML pan - a long handled ball-tip 6mm hex key recommended
  • Refilled with 6 quarts of fluid (drained 4 out plus 2 more for the deeper pan)

Trailblazer SS PML Transmission Pan Install

Stock transmission pan on a Trailblazer PML transmission pan on a Trailblazer

Trailblazer SS, 2006, with a 4L70E transmission, before and after a PML GM transmission pan is installed.

Features

PML Transmission Pan Features

  • Increased oil capacity for cooler temperatures
  • Sand-cast aluminum with raised fins
  • 3/16-inch thick wall construction to add strength to the transmission case
  • 3/8-inch thick gasket flange will not bend when bolts are tightened
  • Machined gasket surface for a secure seal
  • Boss cast into pan can be machined for a temperature sensor
  • Magnetic drain plug for easier, less messy maintenance
  • Mounting hardware provided

Gasket and filter not included (use stock parts).

NOTE:

If you would like PML to machine your pan for a temperature sensor, there is an additional charge of $40. Please include temperature sensor size in the order notes, or you may order over the phone to insure accuracy. 888-832-5248


Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

HUMMER H2 SUT
HUMMER H2 SUT > Performance
HUMMER H2 SUT > Maintenance/Upkeep
HUMMER H2 > Performance
HUMMER H2 > Maintenance/Upkeep
HUMMER H2
   
 

Teaka Toys 1725 San Felipe Road Suite 10 Hollister CA 95023 (831) 630-1545

Company Info | Advertising | Product Index | Category Index | Help | Terms of Use
Copyright © Teaka Toys. All Rights Reserved

Built with VolusionWeb Site Management by Venue Communications, Inc.