PML's extra capacity transmission pan for fits Ford C6 transmissions which are found on 1960's and 1970's full size cars and pre-1988 Ford vans, motorhomes, suvs, and trucks. For example, the C6 transmission is commonly found on:
PML also makes a low profile C6 transmisison pan for applications that cannot accomodate a deeper pan. This low profile pan is intended for the Ford 1960's and 1970's full size cars with the C6 transmission.
The image at left shows three stock Ford C6 tranny pans with the PML deep and low profile pans.
Inside of the pan shown here.
PML designed this pan to work with stock gaskets and filters. Filter supports are not needed as the filter bolts on to the valve body. The fluid level is at the same place with a PML pan or a stock pan so an extension is not needed.
This shows two possible filter kits for Ford C6 transmissions. They both include a rubber-cork type gasket, which we recommended for use with a PML transmission pan.
These are from Fram and have part numbers FT1025 and FT1037 (longer pick-up spout).
Volume: 2.5 qts. over stock
Dimensions: 14 x 14 x 5
Number of Bolts: 17
NOTE:
If you would like PML to machine your pan for a temperature sensor, there is an additional charge of $40. Please include temperature sensor size in the order notes, or you may order over the phone to insure accuracy. 888-832-5248
Teaka Toys 1725 San Felipe Road Suite 10 Hollister CA 95023 (831) 630-1545