Image of cover installed on a 2009 Jeep Grand Cherokee SRT8 at left.
Image of cover installed on a 2006 Jeep Commander at left.
Picture courtesy of surfrman. Check out surfrman's great installation "how to" on the www.jeepgarage.org forum.
Some installations temporarily take the sway bar off, like surfrman's, other people lift their vehicles so no weight rests on the tires and install with the sway bar in place. Installer should verify installation and fitment based on the individual vehicle.
This differential cover fits the Dana 44/226 differential found on the rear of some WK and XK Jeeps. This cover fits:
This rear end cover may fit other SRT8 vehicles or other Jeeps.
Check your differential for size, shape, number of bolts and clearance before ordering and keep in mind that there is a restocking fee of 20% for returns.
This cover features a drain hole with magnetic drain plug, an unmachined boss for a temperature sensor, and a level check/oil fill hole.
Road trip time... a 2008 Jeep Grand Cherokee SRT-8 gets a new PML differential cover.
We do not make a front cover to match the rear SRT8 cover since the front on these vehicles since suspension is connect to the front differential cover. This makes designing and manufacturing an aftermarket cover expensive and replacing the cover difficult. Also on many vehicles the stock front cover is aluminum.
There is a Dana 44 12 bolt (200mm or 213mm) differential also found Jeeps and we are considering the design and development for that application.
This cover did not fit a 2004 Jeep Grand Cherokee because of clearance issues.
Volume: 0.7 quarts over stock
Dimensions: 11.051 x 10.397 x 3.130
Teaka Toys 700 Park Center Dr Hollister, CA 95023 (831) 630-5730