SUV & TRUCK ACCESSORIES
Call Toll Free

Facebook   Twitter


Join our mailing list!



We proudly accept:





 



 

BurnLounge.com - Buy Music, Sell Music, Online Music Store

Green Beret Foundation

BClick to verify BBB accreditation and to see a BBB report.

(Your shopping cart is empty)

  Home > HUMMER H2 > Lift Kits And Suspension >

2002 - 2007 Hummer H2 Pitman and Idler Arm Support System by Cognito
2002 - 2007 Hummer H2 Pitman and Idler Arm Support System by Cognito


 
Alternative Views:


Our Price: $270.00


Availability: Usually Ships in 24 to 48 Hours
Product Code: COG-PISK2008

Description
 
**NOW INCLUDES HARDWARE FOR FACTORY OR AFTERMARKET PITMAN AND IDLER ARMS** Whether your truck is stock height or lifted and running oversized tires, Pitman and Idler arms have always been a problem on the steering systems of the GM and FORD vehicles. The Pitman and Idler arm Support kit by Cognito Motorsports fixes a wear problem that is present on the factory and aftermarket steering system. Aftermarket companies have come out with heavier duty pitman and idler arms that fail the same way that the factory parts do. The design created by Cognito Motorsports solves the problem in an innovative way that no one else has been able to create before. This design works so well that we were able to obtain a UTILITY PATENT.

The problem when not using the Cognito Motorsports Pitman and Idler Arm Support kit:
If you are not familiar with how the GM steering system works, here is a quick lesson. The pitman arm is connected to the output shaft of the steering gear box. When you turn the steering wheel of your vehicle, the motion is directed to the steering gear box which then rotates the pitman arm. The pitman arm has a stud protruding from the end of it where the center link connects, also called the drag link. To help control steering motion, the center link is connected to an idler arm on the passenger side of the vehicle. The idler arm is bolted to the frame and swings in the same arc as the pitman arm, and is fastened to the center link the same way the pitman arm is. The two mounting points for the center link give it support in the motion left and right relative to the vehicle, but there is not enough support in the direction of forward to backward relative to the vehicle. This lack of support is what causes the joints inside of the pitman and idler arms to wear out, which provide the pivot and connection point for the center link. The larger the tire on the vehicle, the faster these joints wear out. Aftermarket companies have come out with beefed up pitman and idler arms, but still have the same premature wear issue in the same joint.

What happens if you are not using the Cognito Motorsports solution?
The front alignment toe settings can not be held because of the slop in the pitman and idler arms allowing the center link to move forward and backward. No control over the toe setting means that your front tires will experience irregular and premature wear. When the center link swings toward the back of the truck, it is also swinging up in an arc. The center link swinging up increases the tie rod angle and can cause tie rod breakage. Most tie rod problems actual originate from pitman and idler arm problems.

The Cognito Motorsports Solution:
The Mechanical Engineer at Cognito Motorsports has come up with a non traditional design to fix this problem, and it works GREAT! The support kit can be installed on pitman and idler arms showing wear, and actually revive them by limiting the movement in the worn direction! If the joint in the pitman and idler arm is not worn excessively, they probably will not have to be changed (this should be determined by a qualified mechanic). If the pitman and idler arm are excessively worn, it is recommended to replace the pitman and idler arms with factory units and add the Cognito Motorsports Pitman and Idler Arm Support Kit. This innovative design is so unique that it obtained a UTILITY PATENT. The support system works by double capturing the studs that protrude from the pitman and idler arms which the center link connects to. At the same time it still allows the studs to pivot on their own axis which is needed when the steering system is turning. This Cognito Motorsports system provides the support needed to prevent the center link from rocking forward and backward in the vehicle.

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

HUMMER H2 > Lift Kits And Suspension
HUMMER H2 SUT > Lift Kits And Suspension
HUMMER H2 > Extreme Off-Roading
HUMMER H2 SUT > Extreme Off-Roading
HUMMER H2
HUMMER H2 SUT
   
 

Teaka Toys 1725 San Felipe Road Suite 10 Hollister CA 95023 (831) 630-1545

Company Info | Advertising | Product Index | Category Index | Help | Terms of Use
Copyright © Teaka Toys. All Rights Reserved

Built with VolusionWeb Site Management by Venue Communications, Inc.