SUV & TRUCK ACCESSORIES
Call Toll Free

Facebook   Twitter


Join our mailing list!



We proudly accept:





 



 

BurnLounge.com - Buy Music, Sell Music, Online Music Store

Green Beret Foundation

BClick to verify BBB accreditation and to see a BBB report.

(Your shopping cart is empty)
You are here: Home > Ford > '05-'11 F250/F350
Sort By
Page of 1
F250/F350 Leveling Kit, Ford Leveling Kit, Leveling Kit, Tuff Country, Tuff Country Leveling Kit, Ford Kit, F250 Leveling kit, F350 Leveling Kit
Ford F250/F350 Leveling Kit by Tuff Country 2.5"-0" 05-11
Our Price: $179.52

Tuff Country EZ-Ride Suspension offers leveling kits for the F250/F350 4wd models from 1980 thru 2011 to lift the front of your Ford truck to be level with the rear. This allows for slightly larger tires and more fender clearance. F250/F350 2005-2011 leveling kits use 2.5" upper coil spring spacers that are added above the existing coil springs. This very popular kit maintains a factory ride. Various leveling kits are available for 2000-2004 F250/F350 models. Ranging from add-a-leafs or leaf packs added to existing leaf springs to replacement leaf springs (along with a track bar relocation bracket) used add additional lift to the front of your truck.

   Simple Installation
   Levels front of truck with the rear
   Maintains a factory or near factory ride
   Available for most F250 & F350 4wd models
   Allows for slightly large tires & more fender clearance
   Limited Lifetime Warranty
Ford Sterling 10¼" or 10½" Ring Gear 12 Bolt, Patterned Fins Differential Cover PML-9513
Ford Sterling 10¼" or 10½" Ring Gear 12 Bolt, Patterned Fins Differential Cover PML-9513
Our Price: $195.00

This PML cover for the big Ford trucks and SUVs has a patterned fin for a custom look. It adds capacity to help lower the differential fluid temperature. Thick walls and gasket flanges add strength to the differential housing and provide a uniform clamping force on the gasket surface for a secure seal.

This rear differential cover fits the 10¼ inch or 10½ inch Sterling rear end found on:

  • Ford F-250, 1989 and newer
  • Ford F-350 single rear wheel, 1989 and newer
  • Ford Excursion

PML makes three different rear end covers for the Ford Sterling 10¼ and 10½ inch ring gear, 12 bolt differentials. They have the same prices but different fin patterns, shapes, sizes and features.

NOTE:

This PML cover has holes for drain and fill. A boss on side optionally can be machined for a temperature sensor for an additional cost. Include your sensor thread size in your order notes, or call to insure accuracy

The level check hole for this differential is provided by Ford and is located on the driveshaft side of the differential housing.

Installations

PML F-350 diff cover installed

Picture of patterned fin differential cover on the Kelderman Screamin' Diesel project truck, a 2004 Harley–Davidson Super Duty F–350 pickup.

PML F-250 differential cover with RTV

Click here for an article by The Diesel Garage showing the installation of patterned fin front and rear covers on an F–250. Image shows RTV on the gasket surface.

PML F-250 differential cover with RTV

Richard's F–250 has a custom paint job on the body and he wanted a custom differential cover to match. Richard selected part number 10816 and matching front cover 10737 and did a custom powder coat in shiny red.

To give your pickup a custom look, buy an as-cast differential cover. We irridite our covers so on arrival they are clean and ready to install or to let you be creative as Richard did with his.

For a larger picture, please click one of the above images. A separate window will open showing a bigger picture. (The larger pictures take a minute to display.)

Ford Sterling 10¼" or 10½" Ring Gear 12 Bolt, Patterned Fins Differential Cover PML-10816
Ford Sterling 10¼" or 10½" Ring Gear 12 Bolt, Patterned Fins Differential Cover PML-10816
Our Price: $195.00

This PML cover for the big Ford trucks and SUVs has a patterned fin for a custom look. PML offers a front cover in a matching design. It adds capacity to help lower the differential fluid temperature. Thick walls and gasket flanges add strength to the differential housing and provide a uniform clamping force on the gasket surface for a secure seal.

This rear differential cover fits the 10¼ inch or 10½ inch Sterling rear end found on:

  • Ford F-250, 1989 and newer
  • Ford F-350 single rear wheel, 1989 and newer
  • Ford Excursion

PML makes three different rear end covers for the Ford Sterling 10¼ and 10½ inch ring gear, 12 bolt differentials. They have the same prices but different fin patterns, shapes, sizes and features.

NOTE:

If you would like PML to machine your pan for a temperature sensor, there is an additional charge of $40. Please include temperature sensor size in the order notes, or you may order over the phone to insure accuracy. 888-832-5248

The level check hole for this differential is provided by Ford and is located on the driveshaft side of the differential housing.

Installations

PML F-350 diff cover installed

Picture of patterned fin differential cover on the Kelderman Screamin' Diesel project truck, a 2004 Harley–Davidson Super Duty F–350 pickup.

PML F-250 differential cover with RTV

Click here for an article by The Diesel Garage showing the installation of patterned fin front and rear covers on an F–250. Image shows RTV on the gasket surface.

PML F-250 differential cover with RTV

Richard's F–250 has a custom paint job on the body and he wanted a custom differential cover to match. Richard selected part number 10816 and matching front cover 10737 and did a custom powder coat in shiny red.

To give your pickup a custom look, buy an as-cast differential cover. We irridite our covers so on arrival they are clean and ready to install or to let you be creative as Richard did with his.

For a larger picture, please click one of the above images. A separate window will open showing a bigger picture. (The larger pictures take a minute to display.)

Ford Sterling 10½" Ring Gear, 12 Bolt, Straight Fins Differential Cover PML-7086
Ford Sterling 10½" Ring Gear, 12 Bolt, Straight Fins Differential Cover PML-7086
Our Price: $195.00

This PML cover for the big Ford trucks and SUVs has a traditional straight fin design. It adds capacity to help lower the differential fluid temperature. Thick walls and gasket flanges add strength to the differential housing and provide a uniform clamping force on the gasket surface for a secure seal.

This rear differential cover fits the 10¼ inch or 10½ inch Sterling rear end found on:

  • Ford F-250, 1989 and newer
  • Ford F-350 single rear wheel, 1989 and newer (if you have a Dually, see our Dana 80 cover)
  • Ford Excursion

PML makes three different rear end covers for the Ford Sterling 10¼ and 10½ inch ring gear, 12 bolt differentials. They have the same prices but different fin patterns, shapes, sizes and features.

PML offers a matching front end cover. Please call for information.

This cover does not yet have a fill port but a fill hole will be available in the future. Please call or email us for details. Some trucks require a fill hole on the cover so check your stock set-up.

NOTE:

If you would like PML to machine your pan for a temperature sensor, there is an additional charge of $40. Please include temperature sensor size in the order notes, or you may order over the phone to insure accuracy. 888-832-5248

If a hole is needed for a temperature sensor, please call or email us for details.

See a comparison of all PML Ford Sterling rear covers.

Installations

PML F-350 diff cover installed

Picture of patterned fin differential cover (part number 9513) on the Kelderman Screamin' Diesel project truck, a 2004 Harley–Davidson Super Duty F–350 pickup.

PML F-250 differential cover with RTV

Click here for an article by The Diesel Garage showing the installation of patterned fin front and rear covers (part numbers 10816 and 10737) on an F–250. Image shows RTV on the gasket surface.

PML F-250 differential cover with RTV

Richard's F–250 has a custom paint job on the body and he wanted a custom differential cover to match. Richard selected part number 10816 and matching front cover 10737 and did a custom powder coat in shiny red.

To give your pickup a custom look, buy an as-cast differential cover. We irridite our covers so on arrival they are clean and ready to install or to let you be creative as Richard did with his.

For a larger picture, please click one of the above images. A separate window will open showing a bigger picture. (The larger pictures take a minute to display.)

Twin-Bar Rear Bar 3-Functions By Delta- LED Stop/Turn / Xenon Backup DEL-01-9586-6LX
Twin-Bar Rear Bar 3-Functions By Delta- LED Stop/Turn / Xenon Backup
Our Price: $496.13

Twin-Bar is a universal multi function ground bar. The bar is constructed of 13 ga plasma cut powder coated steel. It mounts under your bumper using exisiting bolts and requires no drilling. It comes euipped with 2 - 4 watt LED back up lights and 4 LED running and turn signal lights. This fully LED bar draws under 2 amps when fully lite. Wires into your factory harness and does not require any additional harness. Comes fully assembled.
 
Fits Most Trucks
Twin-Bar Rear Bar 3-Functions By Delta - LED Stop/Turn / Backup DEL-01-9586-6LL
Twin-Bar Rear Bar 3-Functions By Delta - LED Stop/Turn / Backup
Our Price: $541.28

Twin-Bar is a universal multi function ground bar. The bar is constructed of 13 ga plasma cut powder coated steel. It mounts under your bumper using exisiting bolts and requires no drilling. It comes euipped with 2 - 4 watt LED back up lights and 4 LED running and turn signal lights. This fully LED bar draws under 2 amps when fully lite. Wires into your factory harness and does not require any additional harness. Comes fully assembled.
 
Fits Most Trucks
Twin-Bar Rear Bar 4-Functions By Delta DEL-01-9586-SEN
Twin-Bar Rear Bar 4-Functions By Delta - Stop/Turn/Backup and Sensors
Our Price: $594.65

Twin-Bar is a universal multi function ground bar. The bar is constructed of 13 ga plasma cut powder coated steel. It mounts under your bumper using exisiting bolts and requires no drilling. It comes euipped with 2 - 4 watt back up lights and 4 running and turn signal lights. It is also equipped with back up sensors and audible warning indicator. This light bar bar draws under 2 amps when fully lite. Wires into your factory harness and does not require any additional harness. Comes fully assembled.
 
Fits Most Trucks
Twin-Bar Rear Bar 4-Functions By Delta DEL-019586-SEL
Twin-Bar Rear Bar 4-Functions By Delta - LED Stop/Turn/Backup and Sensors
Our Price: $610.54

Twin-Bar is a universal multi function ground bar. The bar is constructed of 13 ga plasma cut powder coated steel. It mounts under your bumper using exisiting bolts and requires no drilling. It comes euipped with 2 - 4 watt LED back up lights and 4 LED running and turn signal lights. It is also equipped with back up sensors and audible warning indicator. This fully LED bar draws under 2 amps when fully lite. Wires into your factory harness and does not require any additional harness. Comes fully assembled.
 
Fits Most Trucks
Twin-Bar Rear Bar 5-Functions by Delta - LED Stop/Turn / Xenon Backup + Backup Sensors & Camera DEL-01-9586-CAS
Twin-Bar Rear Bar 5-Functions by Delta - LED Stop/Turn / Xenon Backup + Backup Sensors & Camera
Our Price: $651.07

Delta Twin-Bar will fit most aftermarket rear bumpers with hitch clearance of 9" or greater. The bar is constructed of 13 ga. Plasma cut powder coated steel that will add strength to your rear-end. The 3-function Twin Bar comes equipped with pre-wired 2 (ea) xenon 55W flood lights which will light up the forest when you throw in reverse, 2 (ea) LED Stop lights and 2 (ea) LED Turn Signal Lights. A 4-function Twin Bar comes with 4 audible sensors while the 5-function Twin-Bar comes also with a reverse-activated backup camera, which is compatible with most factory DVD/NAV systems with an AUX input, or with our optional 7" TFT LCD Rear View Mirror (sold separately). Twin-Bar is pre-wired and comes with an OEM harness for easy installation. MADE IN U.S.A.
 
Fits Most Trucks
Hood H.I.D. Light Bar For Jeeps, Trucks and SUVs by Delta DEL-01-9520-HID3
Hood H.I.D. Light Bar For Jeeps, Trucks and SUVs by Delta
Our Price: $694.33

Delta Hood Light Bar was specifically developed for Jeep Wrangler JK & TJ 1997-11. It was designed to complement the Delta SkyBar and vehicle exterior design using the existing factory bolt holes thus requiring NO DRILLING. The Hood Bar is constructed of plasma cut powder coated steel cross bar and machined billet aluminum mounting arms. The Bar offers a vertical swivel for precision aiming and it comes with pre-terminated 3 (ea) 6000K HID driving lights producing an incredible powerful white “daylight” beam of light for night trail adventures. Total draw 8.75 Amps. The lights come equipped with hard plastic covers. The set is also equipped with a complete OEM harness, relay, switch and fuse. (Note: this Hood Bar if used with an optional Hood Bar Mounting Kit #01-9522-BRT, could be used on most trucks and SUV’s).
 
The set contains:
• 1 (ea) Steel cross bar
• 3 (ea) HID driving lights with internal ballasts (Total 8.75 Amps)
• 3 (ea) Hard plastic covers
• 2 (ea) machined billet aluminum engraved mounting arms
• 1 (ea) OEM wiring harness
• 1 (ea) Relay and fuse
   
 
   
 

Teaka Toys 1725 San Felipe Road Suite 10 Hollister CA 95023 (831) 630-1545

Company Info | Advertising | Product Index | Category Index | Help | Terms of Use
Copyright © Teaka Toys. All Rights Reserved

Built with VolusionWeb Site Management by Venue Communications, Inc.