This heavy duty transmission oil pan fits the Nissan RE5R05A transmission. This pan features:
PML designed this pan for Titan trucks with clearance concerns and 350Z cars. This pan has been installed on:
Scroll down to see installations of this pan further down on this
page. Many Infiniti models and some new Hyundai vehicles use this
transmission but we do not have information on interference from cross
members or exhaust for all models. This pan might also work on the
Frontier, Pathfinder and Xterra also use this transmission but we
have heard that cross members that interfer with a larger pan. PML
plans to work on a pan to accomodate the cross members.
Image shows the inside of the pan.
The filter on the RE5R05A is a screen, and it bolts on to the
valve body of the transmission so no filter supports or extentions are
This transmission pan works with stock gaskets. These are usually
about $25 from your local Nissan dealer. For example, the Nissan part
number is 3139790X0A for 2007 and newer Titans or 3139790X00 for 2003 to
The boss provided in this pan can be machined for use with
aftermarket sensors and gages. Titan trucks standardly have a
transmission temperature gauge that works independent of the
transmission pan. If you would like PML to machine the boss on this pan
for a temperature sensor, the machining charge is $40 and this option
must be ordered over the phone, or the temperature sensor measurements in the order notes. The boss can accomodate 1/8 to 1/2 NPT.
PML's low profile Nissan RE5R05A transmission pan compared to a
stock pan. The fins and thick gasket flange make the pan a little
taller than stock.
Installation of a PML pan on a 2004 350Z.
Installation of a PML pan on a 2006 Titan. Our thanks to Mike for the images and feedback.
Installation of this PML Nissan pan on an Infiniti QX56 2010. Our thanks to Melv for the images and feedback.
Installation of the low profile PML transmission for the Nissan
RE5R05A on a Navara 2.5 Diesel in Malaysia. Pan finish is the natural
cast finish. The customer reported that installing the PML pan overcame
the Navara's overheating problem.
The Navara is not sold in the US but it is similar to a Frontier.
PML deep pan for the Nissan RE5R05A has also been installed on the
In the side view picture at the immediate left, you can see that this low profile pan does not hang below the cross member.
Volume: 1 to 1.5 qts. over stock
Dimensions: 14.46 x 12.49 x 2.625 This pan is 2 5/8 from the gasket surface to the top of the fins.
Number of Bolts: 22
Gasket and filter not included (use stock parts).
If you would like PML to machine your pan for a temperature sensor, there is an additional charge of $40. Please include temperature sensor size in the order notes, or you may order over the phone to insure accuracy. 888-832-5248