SUV & TRUCK ACCESSORIES
Call Toll Free

Facebook   Twitter


Join our mailing list!



We proudly accept:





 



 

BurnLounge.com - Buy Music, Sell Music, Online Music Store

Green Beret Foundation

BClick to verify BBB accreditation and to see a BBB report.

(Your shopping cart is empty)

  Home > '10-13' Camaro >

  GM 6L80, 6L80E, Low Profile Transmission Pan PML-11087
GM 6L80, 6L80E, Low Profile Transmission Pan PML-11087


 
Alternative Views:


Our Price: $240.00


Product Code: PML-11087


Color:
  

Machining:
  

 
Description Technical Specs
 

Description and Applications

This heavy duty transmission oil pan fits the GM 6L80, 6L80E transmissions. PML designed this pan for 2006 and newer Cadillac, Camaro, Corvette, and Chevrolet and GM trucks and SUVs. There is a fill hole and plug for vehicles with the fill in the pan, such as some Camaros.

This pan features:

  • Fins and aluminum construction to dissipate heat from transmission fluid
  • Drain plug for easier maintenance
  • NPT hole and plug for pan-fill
  • Thick walls to add strength to the transmission housing
  • Thick gasket flange, machined flat, for a leak-free seal
  • Low profile for clearance

This pan will fit the GM 6L80, 6L80E transmission. This pan is designed for GM/Chevy cars, such as:

  • Cadillac STS 2008-2009, V6 3.6L or V8 4.4L or V8 4.6L
  • Cadillac XLR 2008-2009, V8 4.4L or V8 4.6L
  • Cadillac CTS 2006-2008, V8 6.0L
  • Camaro, 2010 and newer, V8 6.2L
  • Corvette 2006 and newer
  • G8
  • Trucks and SUVs needing a lower profile (such as those with skid plates)

Vehicles have a variety of configurations. Look at yours before you order to verify your transmission and clearance.

These trucks and SUVs have the same transmission but probably will want the deep pan:

  • Avalanche 1500, 2008 & newer
  • Hummer H2, H2 SUT, 2004-2007, V8 6.2L
  • Cadillac SRX 2008-2009, V8 4.4L or V8 4.6L
  • Escalade ESV, EXT 2006-2009, V8 6.0L or V8 6.2L
  • Silverado 1500, 2500, 3500 2008 and newer, V8 5.3L or V8 6.0L
  • Sierra 1500, 2500, 3500 2008 and newer, V8 5.3L or V8 6.0L
  • Silverado 1500, 2500, 3500 2006-2007, V8 6.0L or V8 6.2L
  • Sierra 1500, 2500, 3500 2006-2007, V8 6.0L or V8 6.2L
  • Silverado 1500 SS, 2006-2007, V8 6.0L or V8 6.2L
  • Sierra Denali, 2006-2007, V8 6.0L or V8 6.2L
  • Suburban 1500 and 2500, 2008 and newer V8 5.3L or V8 6.0L (includes HD)
  • Tahoe 2008 and newer, V8 5.3L or V8 6.0L
  • Yukon 2008 and newer, V8 5.3L or V8 6.0L (includes 1500, 2500, XL)
  • Yukon Denali, 2007 and newer, V8 6.2L

For the extra capacity version of this pan, please see PML part number 11025, 6L80, 6L80E deep pan for the 6L80, 6L80E.

In many cases, you will need to drop the exhaust to install this pan. You would need to drop the exhaust to service the transmission with the stock pan as three bolts are not otherwise accessible. See installation images below that show the routing of the exhaust.

Filter and Gasket Information

Image coming soon.

No filter supports or extensions are needed since this pan is the same depth as the stock pan.

This transmission pan works with stock gaskets. PML designed this pan to accommodate the reuseable factory gasket. Please make sure the gasket is clean and free of any holes or nicks to avoid leaks.

Temperature Sensor Information

The pan has three bosses that can be machined for use with aftermarket sensors and gages. It is also possible to use one of the other bosses as the drain plug location. If you would like PML to machine a boss on this pan for a temperature sensor, the machining charge is $40 and this option must be ordered over the phone. The boss can accomodate 1/8 to 1/2 NPT.

Installations

This shows the stock pan and the PML pan installed on a 2012 Camaro. Installation by Bowler Performance Transmissions in Illinois.

2010 Camaro, stock transmission pan    2010 Camaro, PML transmission pan    2010 Camaro, PML transmission pan with fill

Features

PML Transmission Pan Features:

  • Sand-cast aluminum with raised fins
  • 3/16-inch thick wall construction to add strength to the transmission case
  • 3/8-inch thick gasket flange will not bend when bolts are tightened
  • Machined gasket surface for a secure seal
  • Boss cast into pan can be machined for a temperature sensor
  • Magnetic drain plug for easier, less messy maintenance
  • Mounting hardware provided

Gasket and filter not included (use stock parts).

NOTE:

If you would like PML to machine your pan for a temperature sensor, there is an additional charge of $40. Please include temperature sensor size in the order notes, or you may order over the phone to insure accuracy. 888-832-5248


Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

'10-13' Camaro
   
 

Teaka Toys 1725 San Felipe Road Suite 10 Hollister CA 95023 (831) 630-1545

Company Info | Advertising | Product Index | Category Index | Help | Terms of Use
Copyright © Teaka Toys. All Rights Reserved

Built with VolusionWeb Site Management by Venue Communications, Inc.