This PML Dana 50/60 front end cover is designed
for older Ford Super Duty trucks. This cover clears the ring gear and
the steering linkage on most older Ford truck applications. Possible
applications for this cover include:
Our patterned fin Dana 50, 60 front cover is designed for newer applications to clear the steering linkage and is too shallow to clear the gear on older trucks.
If your stock cover has a vent fitting (instead of having a
vent on the differential housing), this differential cover cannot be
used. The vent is common on Dodge trucks.
Configurations vary so please check carefully. Some F–250
trucks have independent front suspension and cannot use this cover. Some
Dodge Ram 2500 and 3500 trucks can have a trackbar and do not have
clearance for a larger cover. Be sure to check for clearance with the
steering all the way at stops.
This differential cover has drain and fill/level check holes.
1994 Ford F–350 with PML Dana 60 front cover installed. Cover finish is black powder coated.
For a larger picture, please click one of the above images. A separate window will open
showing a bigger picture. (The larger pictures take a minute to display.)
Volume: 0.5 quarts over stock, approximately. On
Ford F–350 trucks, this front end differential cover is slightly deeper
than the stock covers for added fluid capacity.
Dimensions:11.98 x 11.15 x 3.68 On
the inside, the distance from the gasket flange to the inside is
appoximately 3.1 inches at the tallest point. Check for clearance with
wheels straight, left and right. Check that the fill/level check is in
the same location as on your stock cover.
Teaka Toys 1725 San Felipe Road Suite 10 Hollister CA 95023 (831) 630-1545