Join our mailing list!
We proudly accept:
(Your shopping cart is empty)
2007-08 Tundra 4x4 & 4x2 (5-lug,coil-over) (3"Front/1"Rear & Diff Drop) Lift kit by Truxxx
Usually Ships in 24 Hours
This 3" lift and level kit is the newest available for the 2007-08 Toyota Tundra. The kit levels the truck by lifting the front 3" and the rear 1" - this creates the lifted level look everyone loves but still retains all the stock suspension qualities Toyota spent so much time engineering into their new 2007-08 Tundra 4x2 and 4x4 pickups.
Our factory ride lift and level kit fixes the "tail in the air" stance that new 2007-08 Toyota Tundra 4x2 and 4x4 pickup trucks come with.
We engineered this kit to be a full 3" and did the detail work to make sure your new Toyota Tundra only looks different, all the engineering, reliability and quality you have come to know with Toyota products is still first and foremost.
We have included everything you will need to make sure of this...
We made sure to offset the top and bottom plates before we sandwiched the tubing and created the new strut cap to ensure proper spring clearance
We made sure to include a differential drop so that on the 4x4 models your CV joints would last as long as Toyota designed them too
We made sure to include a bump stop drop so that the shock doesn’t use the internal bump stop, that the bump stop on the frame is doing the job it was designed to do
We made sure to use cad plated U-bolts and welded and powder coated blocks so that you truck always looks new and the finish quality is the same as the parts Toyota used on the new Tundra 4x2 and 4x4 pickups
The 2007-08 Toyota Tundra 4x2 and 4x4 lift and level kit installs in 2-3 hours, doesn't sacrifice the smooth stock ride quality and can be installed with hand tools. Our kit is made in the USA out of the finest steel, and we supply a complete kit, with instructions, alignment specs and dedicated support.
By making sure you use a Truxxx Lift and Level kit on your new 2007-08 Toyota Tundra 4x2 or 4x4 pickup, you can be assured that the kit will:
Increase ground clearance over traditional bracket type lift kits even without the use of larger wheels and tires for those interested in getting the most out of their truck for recreational or construction use.
Ride Quality - The Truxxx kit does not change preload and maintains the stock smooth ride. Other kits get their lift from increasing preload on the spring. This means that the ride is harsher and less compliant. This is a big issue for many consumers.
Installation of the Truxxx kit requires no disassembly of the strut. Other kits require the disassembly of the strut in order to install their kit. This means that a strut compressor is required (special tools) which not every shop has. Also, if the strut is reassembled slightly crooked (no positive indexing on the strut!) then the assembly will have to be disassembled and straightened. This happens fairly often. Because of the strut disassembly/reassembly the installation time is about DOUBLE that of the Truxxx kit.
Truxxx Lift/Level kit does not require any after installation maintenance (no need to re-torque the mounting bolts ) Other kits must be re-torqued after 6-12,000 miles because of its polyurethane construction (plastic flexes under load).
Maintains stock ride quality
Allows for up to 33" tires to fit without rubbing
Kit can be installed in two - three hours
Alignment specs provided
Truck can be returned to stock after lease term is up
Made in the USA
Installation Time: Approximately 2-3 hours
Toyota Tacoma Side Bars by Steelcraft
07 Toyota Tundra Pop Up Locker Side Rails by Putco
N-Fab Pre-Runner for '06-'09 Toyota FJ Cruiser
Single Lid Diamond Plate Tool Box by UWS
00-06 Tundra Pop Up Locker Side Rails by Putco
Share your knowledge of this product with other customers...
Be the first to write a review
Browse for more products in the same category as this item:
Lift Kits and Suspension
Send Us Feedback
1725 San Felipe Road Suite 10 Hollister CA 95023 (831) 630-1545
Web Site Management
Venue Communications, Inc.